What Are The Factors That Should Be Paid Attention To During The Walk Through Security Gate Test?

- May 11, 2019-

Many devices need to be specially tested. If the walk through security gate has not been tested, it is difficult to grasp what the performance of the walk through security gate is. At present, we will see that in the actual use of security gates, testing is actually a very important part of it. However, we are concerned about the equipment produced by many small enterprises in the testing process, which always worries us.


It is necessary to test according to the product design manual in the current walk through security door test. In the past, there would be a safety accident of charger, which is actually caused by the less rigorous technology and materials used. While we are concerned about the actual use of many facilities, we will see that when testing, we should bring us some advantages.

1515045932100763

On the one hand, there are some material and process factors to be noted, such as our test in the manufacturer and on-site installation of the test can not be the same link. After all, the production of security gates has its own testing requirements, in fact, the installation process also has its own installation needs. In the long-term use, we will experience that the installation will be much better if we can carry out rigorous testing.


Other experts said that because the indoor operating environment is relatively good, the test will be relatively smooth. Professional engineers say that in any batch of products, it is necessary to carry out special inspection and testing, knowledge is a probabilistic problem. In the production of security gates, we can see that some manufacturers still have a relatively large number of spot checks. After all, they are willing to test some products in the early stage to ensure that there will not be too many problems in the later use, considering that there may be some problems in the later maintenance.