The difference of all kinds of access control turnstile gate machines
In our daily life, we often see a lot of turnstile gate machines, such as tripod turnstile, flap gate, swing gate and so on. In many places, such as stations, communities, buildings and office buildings, and so on. These gate brake machines are all necessary things. Therefore, different kinds of barrier gate machine, also need different understanding.
The introduction of different types of gate control brake machines
flap gate: at least two wings, the channel width is generally less than 600mm. It is suitable for one way or two-way control of human flow. The speed is fast, 30-40 people / minutes.
The three roll gate is composed of three rods. The length of the rod is 500mm. The gap of the rod can only hold one person. It is suitable for one way or two way control of the flow of people, and the general speed is 25-30 people / minute.
Swing gate: swing rod length can be customized, single rod length standard 600mm, the longest can reach 900mm, so that the width of two bar passages can reach 180cm, which is suitable for one-way or two-way control of the flow of people, vehicles (electric vehicles, tricycles, bicycles), the general speed is 25-30 people / min.
Full high gate: rotary operation, the channel width is generally less than 600mm, suitable for one-way or two-way control of the flow of people, slow speed, 25-30 people / minutes.
Stick gate : a bar with a wide channel width of less than 600mm. It is suitable for one way or two-way control of human flow. The speed is fast, 30-40 people per minute.
Combined with the characteristics of these channels, we can choose according to different requirements:
1. It is only to control the flow of people, and the speed is fast, and the flap gate and stick gate can be selected.
2. If we want to control the flow of people and control the traffic, then we should choose the swing gate.
3, all high gate should be used in special occasions such as prison and other special occasions.
4, only control the flow of people, the demand is not high, then it is recommended to choose tripod turnstile, flap gate, and stick gate.
The difference introduction of all kinds of gate control brake machines. Our Suzhou aoteng technology is a professional manufacturer of intelligent gate brake machine. There is a very rich production, sales, installation and after-sale experience of brake machine. We are very familiar with the different gate brake machines. So, if you have the need, you can contact our staff. Our staff will give you a professional answer.