Installation and adjustment of conveyor belt of automatic weighing machine
The automatic weighing machine has the advantages of simple operation, high precision and fast sorting. It is widely used in food, medicine, toys, daily chemicals, electronics and other industries. It is favored by customers for improving product quality standards. Conveyor belt is an important component of automatic weighing machine. Today, Xiaobian will tell you the installation and adjustment method of conveyor belt of automatic weighing machine.
Installation of conveyor belt of automatic weighing machine:
1. Rotate the adjusting nut to adjust the distance between the driven shaft and the driving shaft to Zui small;
2. Check the running direction of the belt and sleeve the belt into the tray according to the direction of the thick arrow (Fig. 1).
3. Adjust the adjusting nuts on both sides of the tray so that the belt tension is moderate. And place the belt in the center of the tray.
Adjustment of conveyor belt of automatic weighing machine:
1. Adjust the belt tension to a proper level, put it on the machine for operation, and observe the operation of leather;
2. If the belt is in the middle of the tray, it is in normal state, and no adjustment is required;
3. If the belt is to the left, adjust as follows:
The left belt can be "tightened" and requires gradual adjustment. Observe while adjusting until the belt returns to the center position. If the adjusting nut is found to be very tight, do not force the adjustment.
The belt on the right side can be "loosened" and requires gradual adjustment. Observe while adjusting until the belt returns to the center position.
If the deviation is relatively large, it is difficult to come back after slowly adjusting, you can quickly loosen the right belt first.
It is better to stop the machine for inspection immediately if the belt has friction with the side baffle.
On the "automatic weighing machine conveyor belt installation and adjustment method" is simply introduced here, I hope to help you. Suzhou aoteng Electronic Technology Co., Ltd. focuses on the production and sales of weighing machine, automatic weighing machine, metal detector and X-ray machine, and provides customers with professional weight detection, metal detection and safety prevention and control programs, welcome to consult.