Railway station access control single core swing gate barrier
Model No: SZAT-B8014
● Have breakdown self-check and alarm prompt function, easy maintenance and use;
● Through main control board's built-in small press plate,it can be programed the running state of the devices;
● Mechanical structure anti-clamp and anti-collision function, in the process of swing arm reset,if blocked, within the prescribed time, the motor stop working automatically, the default time delay till reset again (until it is reset), and the strength is very small less than 2 kg;
● Impact resistant function, without receiving the start signal, automatic swing arm is locked automatically;
● Can directly manage the computer to realize remote control and management;
● Delay automatic reset Function, standard is to automatically reset after the open of 5 seconds.;
● Swing arm pull out automatically while out of power, and close automatically while in power, conforming to the requirements of fire control.
● Sound and light alarm function, including illegal enter alarm, the anti-pinch alarm, etc;
● Count function;
● Infrared reset function;
● Case lengthen, swing arm extended, etc.
304 drawing stainless steel
Length of the bar:
Simple pendulum channel:
Double pendulum channel:
Scope of application
● Station, wharf, tourist attractions, import and export channel management
● Exhibition, swimming pool and other ticket channel management
● Import and export enterprises attendance, access control, consumer management
● Special channel control
The reverse process of the installation is repeated when the equipment needs to be dismantled before it is shipped.
The system should be stored in a clean and dry place, and overheating and overtide will damage the components of the system. If the equipment is not used for a long time, it should be stored in the original packing box.
The storage conditions of the equipment are:
1. In the condition of transportation or storage, the equipment must be able to be placed under the following environmental conditions for less than 15 weeks:
Storage temperature: - 20 ~ +60 C (not condensed);
Humidity: 20% to 95%;
2. the equipment that needs long-term storage should have good storage conditions. The storeroom should be clean, dry and well ventilated, and no corrosive gas is around. The relative humidity is no more than 80%. The equipment should be in the packing box.
1.Barriers made from stainless steel, acrylic glass, etc; Mechanical Anti-Pinch structure enable motor to stop working automatically in given time if there is something on the way during reset, and reset again after default time delay
2.Automatic counting indicating passenger’s number.
3.Human base model indication function, real time displaying, improve the passing rate and convenient maintain
4.Anti pinch function, barriers auto open when power shut, insure user safety.
5.Break-in ,tail ,over-pass and reverse alert function in order to keep orderliness and effective manage
6.Super combination capacity, adjustable model on site
7.Barriers move speed auto adjust with card reader, problem self-recovery, error calls function which could convenient users and operators
12v DC level or 12v pulse>100ms
Length of swing arm
Less than 30 person/minutes
Frame or 304 stainless steel cover
Single and double(optional)
Outdoor and indoor
Width of passage
Opening or close time
Time required to enter the state after power supply
Automatic reset time after failure
RS485 standard electric appliance,communication distance≤1200mts (access control)
Swing arm drive angle