Pedestrian Access Control Flap Gate

Pedestrian access control single core flap gate Model No:SZAT-Y2600 Power voltage:AC220V±10% 50HZ Input signal:12v DC level or 12v pulse>100ms Length of arm:260mm Structure :Frame or 304 stainless steel cover Width of passage:≤600mm Product size:1200(L)*300(W)*980(H)mm
Chat Now

Product Details

Pedestrian access control single core bridge arc edge inclined flap gate

Model No:SZAT-Y2600

SZAT-Y2600-02.jpg


Product introduction

 Flap gate, one of the channel management equipment, mainly used for pedestrian management; it can quickly open, safe and convenient, is the ideal management of pedestrian high frequency access grooming equipment; has been widely used in airports, subway stations, railway stations, docks, attractions, parks, dormitory units, walkways. With smart card stripping type ticket management system function, the formation of staff and unattended management.

Y2600尺寸图.png 

Technical parameter:

Material:

304 drawing stainless steel

Cover thickness:

1.5mm

Cabinet thickness:

1.2mm

External Dimension:

1200*300*980mm

Channel width:

≤600mm

 

Production process: 

cutting, cutting board, stamping, bending, welding, grinding, assembling, testing, finished products, packing.

闸机-工艺流程图.png

Structure

 It is composed of the main engine box and the active flap board, which has the advantages of fast running speed and luxurious atmosphere. The shortcoming is that the passageway is narrow and only the pedestrian passes through. Ordinary flank: the frame box, the core, flap arm, the control system, the infrared sensor, the control equipment and so on.


Access control system:

闸机-门禁系统.png

Maintenance of the circuit power of the channel gate:

● cut off the power and clean the dust on the surface. Attention must not be washed with water to prevent short circuiting from occurring.

● refer to the instructions of the brake machine, check whether the parameters of each part are normal, there are no aging electronic components. There is a problem, to contact the manufacturers, follow it, find the root of the problem, the replacement of individual electronic components.

● according to the previous situation, see the circuit part if there is a problem, no problem, then check the circuit, power supply, electric wire, the plug is exposed to or loose, dressing, finishing, tighten the plug, check there is no leakage, if the wire has to be replaced aging.


Model No.

SZAT-Y2600 

Power voltage

AC220V±10% 50HZ

Drive voltage

DC24V 20W

Operation condition

-30-70

Relative humidity

<95% None-condensation

Input signal

12v DC level or 12v pulse>100ms

Working current

<2000Ma

Length of flap arm

260mm

Communication port

 RS485

Pass speed

Less than 30 person/minutes

Structure  

Frame or 304 stainless steel cover

Open direction

Single and double(optional)

Install place

Outdoor and indoor

IP degree

IP43

Width of passage

600mm

Opening or close time

0.6s

Time required to enter the state after power supply

3 seconds

Automatic reset time after failure

10 seconds

Product size

1200(L)*300(W)*980(H)mm

Gross weight

65kg


Inquiry