IC ID card control dual core bridge inclined flap gate
Model No:SZAT-Y2380A
Features:
1.Problem self-recovery and corrective measure ability, convenient maintain and adjust
2.Motherboard with high clean sound read chips which could broadcast in light of user’s requirement
3.Human base model indication function, real time displaying, improve the passing rate and convenient maintain
4.Automatic counting indicating passenger’s number
5.Resetting automatically, auto cancel the pass through and closed barrier in case nothing pass the channel in a setting time
6.Anti pinch function with UPS to satisfy firefighter requires, ensure user’s safe
Functional characteristics:
● It has the function of self inspection and alarm, which is convenient for the user to maintain and use.
● The operating state of the programmable equipment through the built-in small press disk on the main control board;
● The function of sound and light alarm: including illegal entry and tailing alarm;
● Anti flushing function, when the switching signal is not received, the telescopic arm is automatically locked.
● The synchronous function of the telescopic arm;
● When the power is broken, the channel is open automatically and the power is closed automatically.
● Can be connected with a variety of card reading equipment to receive relay switch signal work;
● One way or two way control personnel can get in and out.
Technical parameters :
Power voltage : |
AC220±10% 50hz |
Drive voltage : |
AC12V+AC18V |
Input signal : |
12v DC level or 12v pulse more than 100ms |
Length of the bar: |
260mm |
Pass speed: |
30 persons per minutes |
Structure : |
frame or 304 stainless steel cover |
Open direction : |
single and double (optional) |
Gate opening and closing time: |
outdoor and indoor |
IP degree : |
0.6s |
Width of passage : |
1200mm |
Case size: |
1000x300x980mm |
Model No. | SZAT-Y2380A |
Power voltage | AC220V±10% 50HZ |
Drive voltage | DC24V 20W |
Operation condition | -30℃-70℃ |
Relative humidity | <95% None-condensation |
Input signal | 12v DC level or 12v pulse>100ms |
Working current | <2000Ma |
Length of flap arm | 260mm |
Communication port | RS485 |
Pass speed | Less than 30 person/minutes |
Structure | Frame or 304 stainless steel cover |
Open direction | Single and double(optional) |
Install place | Outdoor and indoor |
IP degree | IP43 |
Width of passage | ≤600mm |
Opening or close time | 0.6s |
Time required to enter the state after power supply | 3 seconds |
Automatic reset time after failure | 10 seconds |
Product size | 1000(L)*300(W)*980(H)mm |
Gross weight | 65kg |